Elipsys Swingarms

Swingarms for Elipsys frames are built with offset for up to 300 rear tyres, and feature hidden billet aluminium axle caps.

Similar versions of these swing arms can be built for DYNA frames, and stock specification for FXR can also be made.
   

FANG SWINGARMS

Fang' swingarms for Dyna, FXR, and Sportster. Available in stock length and width, or overstock length and/or width.

 
   
SLAM
STINGER


1" overstock length, takes up to 200 rear tyre
1" overstock length, takes up to 200 rear tyre

Elipsys frame and swingarms for our FXR based 'PACER' and 'FANTOM' models, with offset and width for up to 200 rear tyre, with belt. This frame is designed with an FLT transmission mind, and accepts either EVO or Twin Cam motors.

The cantelevered 1" overstock swingarm gives adequate clearance over the rear of an FLT sump, whilst giving adequate lower belt clearance when using a 32 tooth front pulley, and a 61 or 65 tooth rear pulley. For use with 139 tooth belt.

Elipsys frame and swingarms for Sportster, with offset and width for up to 180 rear tyre, with belt. This frame is designed with a Buell donor bike in mind, and accepts the forks, wheels and running gear.

The cantelevered 1" overstock swingarm gives adequate lower belt clearance when using a 29 tooth front pulley, and a 61 tooth rear pulley. For use with 139 tooth belt.

WIDE KITS

Wide Kits for Softail And Dyna. Hidden axle ends with billet covers. For 0.75" or 1.0" axles.

 
   
   
Pulley Brake  

click image on left to go to pulley brakes page

ALL OUR SWINGARMS ARE AVAILABLE WITH THE RADIAL/ HARRISON / U-STATION IN BOARD PULLEY BRAKE SYSTEM

 

fantom