|
BIG TWINS (EVO AND TWIN CAM)
Breather Bracket Kits are available with stock width,
oversize, and undersize arms. Stock armsets are 150mm center-to-center
of the holes that mount to the breather holes on the motor. Other
Breather Bracket Kits are available in +2.5mm, +5.0mm, +10.5mm, -2.5mm,
and -5.0mm widths. This enables Flo-Tec to be fitted to most squared,
bored and stroked motors from 80", up to Merch 131".
Screw our knurled measuring cones
into the breather holes on your
motor to measure the correct distance between centres.
|
FITMENT TABLE
At present these are the motors that we're
sure we can fit. Other motors from other manufacturers are being
tested. Special built motors are usually not a problem for us,
even if the heads are skimmed, or stroker plates are installed.
If you're not sure of your fitment, we'll send you a
pair of measuring cones, as seen on this page. Or ACCURATELY measure
the distance between the centers of the breather holes, and we'll
make you up a Breather Bracket with an armset to fit.
|
| ARMSET |
MIN mm CENTER |
MAX mm CENTER |
MOTOR |
| PLUS 10.5 |
159.49 |
161.95 |
MCH131 |
| PLUS 5.00 |
153.96
|
156.46 |
MCH114,MCH117, S&S103,
TP103 |
| PLUS 2.50 |
151.46 |
153.96 |
MCH 107, MCH120, S&S96, S&S98,
TP96, TP98 |
| STOCK |
149.00
|
151.46 |
STOCK, EVO80, TC88, TC95, S&S89,
S&S96, TP113, TP116, TP121 |
| MINUS 2.50 |
146.50
|
149.00 |
S&S88, S&S107, S&S113,
S&S93, TP88, TP93, MCH97,TP107(S) |
| MINUS 5.00 |
144.00
|
146.50 |
S&S100, S&S107 |
| |
| LEGEND: |
|
| TP |
TOTAL PERFORMANCE |
| S&S |
S&S |
| MCH |
MERCH |
| FTS |
FATSO |
|
EVO + TC
|
HARLEY DAVIDSON
|
|
|
|
|
|
Evo non-Breather 5/16" UNC
|
Evo Breather 1/2" UNC
|
Twin Cam 3/8" UNC
|
|
All Breather Bracket Mounting Kits come with polished
stainless steel banjo bolts.
|
DUAL QWIKSILVER
Our kits for QwikSilver dual carbs contains two mounting
collars without arms that fix to the carb entrances. Either Maxa Horns
or Stub rings screw onto these two collars. As with all the other
Horn fitments there are three grades of stainless steel mesh filters
available for the throat of the Horns.
SPORTSTER
Our fitment for Sportster and Buell is new,
so we're still referencing which carbs we can adapt to.
At present we do only one width of Breather Bracket
for stock (external dimesions) Sportster and Buell motors. Sportsters
and Buell with Big Bore kits will also accept this kit, but we're
not yet sure about stroked motors.These fitments are good for CV and
Mikuni carbs, and we expect them also to fit QwickSilver, with S&S
being tested shortly.
HOW TO ORDER
On the linked Fitment Kits pages you should
be able to find the information that you need to order a kit for your
motor. If you can't find what you're looking for, please
call, fax or email our Technical Department (info@radial-flotec.com),
and we'll do our best to help you. Please include the following
info to help us help you:
(1) What model is your bike, and what size and year
your motor is: (cubic inches, and Evo Non-Head Breather, Evo Head-Breather,
or TwinCam 88)
(2) What type of heads? (HD, Edelbrock, Rev Tech,
S&S, Patrick Racing etc)
(3) Any special modifications to Cases, Heads or
Cylinders? (eg Shaved heads, heavy gaskets, stroker plates)
(4) What carburettor is fitted.
(5) Which Horn or Air Filter assembly you wish to
order.
(6) What finish you want, polished, clear anodised
or black anodised.
(7) Where you live so we can quote on the courier.
CLICK
HERE FOR COMPETE FITMENT LISTS
|
