S&S SUPER E & G FOR EVO

FOR S&S MANIFOLD, WITH FLO-TEC SPACERS

 

close this window

 

DOWNLOAD INSTALLATION
INSTRUCTION SHEET

MAC - PC

 


Kit contains: FLO-TEC Breather Bracket, polished stainless steel banjo bolts, S&S adapter rings, FLO-TEC tapped and threaded Breather Bracket spacers, O-Rings, and mounting hardware.

 

There are 2 ways to go with S&S for Evo:

(1) The Complete FloTec Option

SEE THE (S&S SUPER E & G FOR EVO - WITH FLO-TEC MANIFOLD) OR (S&S SUPER E & G FOR TWIN CAM - WITH FLO-TEC MANIFOLD) PAGES

Our preferred fit for S&S carbs. Our short entrance manifold puts the carb 25mm deeper in the motor, enabling it to fit neatly in behind the breather bracket, with no extra spacers between the Bracket and the heads. This kit also contains a specially cast rubber gasket, which is profiled on the front edge to match the carb casting, and on the rear edge to match the manifold. The result is a clean and properly matched union with no ugly steps or overlaps. VIEW THIS OPTION ON THE (S&S SUPER E & G FOR EVO - WITH FLO-TEC MANIFOLD) OR (S&S SUPER E & G FOR TWIN CAM - WITH FLO-TEC MANIFOLD) PAGES

(2) THIS PAGE -The S&S MANIFOLD, with FLO-TEC Threaded Spacer Option

Using the S&S cast manifold is possible, but because of the length of the manifold entrance, the FLO-TEC Breather Bracket needs to be spaced 22-25mm from the heads. This kit contains the spacers, grooved to accept O-Rings. It adds 22-25mm to the out-hang of the FLO-TEC bracket, and intake components, which may cause leg clearance problems on some models.

A manual choke knob kit is needed to replace the choke lever that would usually be on the back of the S&S filter backing plate. You can obtain this from S&S, or we can supply you with our custom kit.
We do the spacers (with o-ring seals) with 1/2" UNC threads to screw directly into the heads, and a corresponding female thread to receive the banjo bolts.

The threaded spacers space the bracket out 22-25mm from the heads - this increases the likelihood of the horn or filter assembly interfering with your leg. We have found up to 3mm difference between S&S manifold fitments, and it may be necessary for you to shave up to 3mm off the face of the spacer to have a perfect fit between the carb and the S&S fibre manifold isolator block.

 

Using the S&S manifold and FLO-TEC spacers adds 22-25 mm to the out-hang of the assembly.

 

WHAT TO ORDER

You'll need the FLO-TEC Breather Bracket kit (correct width for the size of your motor), with spacers, then horn and/or the air filter assembly of your choice.

S&S SUPER E SHORTY - FOR S&S MANIFOLD, WITH FLO-TEC SPACERS (SUPER G FITMENTS ARE LISTED BELOW)
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219418P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

S&S

219419P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

S&S

219420P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

S&S

219421P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

S&S

219422P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

S&S
         

219418A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

S&S

219419A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

S&S

219420A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

S&S

219421A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

S&S

219422A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

S&S
         

219418B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

S&S

219419B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

S&S

219420B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

S&S

219421B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

S&S

219422B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

S&S
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219423P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

S&S

219424P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 10.5mm

S&S

219425P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

S&S

219426P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

S&S

219427P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

S&S

219428P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

S&S
         

219423A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

S&S

219424A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 10.5mm

S&S

219425A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

S&S

219426A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

S&S

219427A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

S&S

219428A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

S&S
         

219423B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

S&S

219424B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 10.5mm

S&S

219425B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

S&S

219426B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

S&S

219427B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

S&S

219428B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

S&S
 

S&S SUPER G SHORTY - FOR S&S MANIFOLD, WITH FLO-TEC SPACERS
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219452P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

S&S

219453P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

S&S

219454P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

S&S

219455P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

S&S

219456P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

S&S
         

219452A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

S&S

219453A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

S&S

219454A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

S&S

219455A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

S&S

219456A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

S&S
         

219452B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

S&S

219453B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

S&S

219454B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

S&S

219455B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

S&S

219456B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

S&S
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219456P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

S&S

219457P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 10.5mm

S&S

219458P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

S&S

219459P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

S&S

219460P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

S&S

219461P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

S&S
         

219456A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

S&S

219457A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 10.5mm

S&S

219458A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

S&S

219459A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

S&S

219460A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

S&S

219461A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

S&S
         

219456B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

S&S

219457B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 10.5mm

S&S

219458B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

S&S

219459B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

S&S

219460B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

S&S

219461B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

S&S