S & S SUPER E & G FOR EVO

WITH FLO-TEC MANIFOLD

Kit contains: Breather Bracket, polished stainless steel banjo bolts, S&S adapter rings, Breather Bracket spacers, O-Rings, mounting hardware, FLO-TEC manifold and nitrile rubber gasket.

 

close this window

 

DOWNLOAD INSTALLATION
INSTRUCTION SHEET

MAC - PC
 

There are 2 ways to go with S&S for Evo:

(1) The S&S MANIFOLD, with FLO-TEC Threaded Spacer Option:

SEE THE (S&S SUPER E & G FOR EVO - WITH S&S MANIFOLD and FLO-TEC SPACERS) OR (S&S SUPER E & G FOR TWIN CAM - WITH S&S MANIFOLD and FLO-TEC SPACERS) PAGES

Using the S&S cast manifold is possible, but because of the length of the manifold entrance, the FLO-TEC Breather Bracket needs to be spaced 22-25mm from the heads. This kit contains the spacers, grooved to accept O-Rings. It adds 22-25mm to the out-hang of the FLO-TEC bracket, and intake components, which may cause leg clearance problems on some models. SEE THE (S&S SUPER E & G FOR EVO - WITH S&S MANIFOLD and FLO-TEC SPACERS) OR (S&S SUPER E & G FOR TWIN CAM - WITH S&S MANIFOLD and FLO-TEC SPACERS) PAGES

(2) THIS PAGE -The Complete FLO-TEC Option:

Our preferred fit for S&S carbs. Our short entrance manifold puts the carb 25mm deeper in the motor, enabling it to fit neatly in behind the breather bracket, with no extra spacers between the Bracket and the heads. This kit also contains a specially cast rubber gasket, which is profiled on the front edge to match the carb casting, and on the rear edge to match the manifold. The result is a clean and properly matched union with no ugly steps or overlaps.

Manifolds available in most lengths and finishes. See the manifolds pages for all the options. Rubber gasket available in Grey or Black. A manual choke knob kit is needed to replace the choke lever that would usually be on the back of the S&S filter backing plate. You can obtain this from S&S, or we can supply you with our custom kit.

Our own shorter-entrance manifold, based on the short Mikuni manifold, and a specially cast Nitrile rubber gasket mounts the carb. The manifolds are available for stock (1.815"OD/1.625 ID) or S&S (1.880" OD/1.780" ID) diameter intake ports, and with VOES for Evo, sensor boss for Twin Cam, or plain.

Using one of our manifolds allows the breather bracket to mount directly to the heads, without the FLO-TEC spacers.

WHAT TO ORDER

You'll need the Complete FLO-TEC mounting bracket and manifold kit (correct width for the size of your motor), then either the then horn and/or the air filter assembly of your choice.

S&S SUPER E SHORTY - WITH FLO-TEC MANIFOLD (SUPER G FITMENTS ARE LISTED BELOW)
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219401P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

FLO-TEC

219402P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

FLO-TEC

219403P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

FLO-TEC

219404P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

FLO-TEC

219405P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

FLO-TEC
         

219401A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

FLO-TEC

219402A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

FLO-TEC

219403A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

FLO-TEC

219404A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

FLO-TEC

219405A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

FLO-TEC
         

219401B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

FLO-TEC

219402B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

FLO-TEC

219403B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

FLO-TEC

219404B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

FLO-TEC

219405B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

FLO-TEC
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219406P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

FLO-TEC

219407P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 10.5mm

FLO-TEC

219408P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

FLO-TEC

219409P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

FLO-TEC

219410P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

FLO-TEC

219411P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

FLO-TEC
         

219406A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

FLO-TEC

219407A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 10.5mm

FLO-TEC

219408A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

FLO-TEC

219409A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

FLO-TEC

219410A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

FLO-TEC

219411A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

FLO-TEC
         

219406B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

FLO-TEC

219407B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 10.5mm

FLO-TEC

219408B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

FLO-TEC

219409B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

FLO-TEC

219410B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

FLO-TEC

219411B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

FLO-TEC

S&S SUPER G SHORTY - WITH FLO-TEC MANIFOLD
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219435P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

FLO-TEC

219436P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

FLO-TEC

219437P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

FLO-TEC

219438P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

FLO-TEC

219439P

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

FLO-TEC
         

219435A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

FLO-TEC

219436A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

FLO-TEC

219437A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

FLO-TEC

219438A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

FLO-TEC

219439A

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

FLO-TEC
         

219435B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

FLO-TEC

219436B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

FLO-TEC

219437B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

FLO-TEC

219438B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

FLO-TEC

219439B

EVO BT NON BREATHER (5/16"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

FLO-TEC
         

PART NO.

MOTOR TYPE

FINISH

BREATHER WIDTH

MANIFOLD

219440P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

STOCK FLO-TEC

FLO-TEC

219441P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 10.5mm

FLO-TEC

219442P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 5.0mm

FLO-TEC

219443P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

plus 2.5mm

FLO-TEC

219444P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 2.5mm

FLO-TEC

219445P

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

POLISHED

minus 5.0mm

FLO-TEC
         

219440A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

STOCK FLO-TEC

FLO-TEC

219441A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 10.5mm

FLO-TEC

219442A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 5.0mm

FLO-TEC

219443A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

plus 2.5mm

FLO-TEC

219444A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 2.5mm

FLO-TEC

219445A

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

CLEAR ANODISED

minus 5.0mm

FLO-TEC
         

219440B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

STOCK FLO-TEC

FLO-TEC

219441B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 10.5mm

FLO-TEC

219442B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 5.0mm

FLO-TEC

219443B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

plus 2.5mm

FLO-TEC

219444B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 2.5mm

FLO-TEC

219445B

EVO BT BREATHER (1/2"UNC BREATHER HOLE)

BLACK ANODISED

minus 5.0mm

FLO-TEC